Brand | Netac |
---|---|
Model | Netac Basic 16GB |
Part No | NTBSD4P32SP-16 |
Capacity (GB/TB) | 16GB |
RAM Type | DDR4 |
Bus Speed(MHz) | 3200MHz |
CAS Latency | 16-20-20-40 |
Module Type | U-DIMM |
Speed Rating | PC4-25600 |
LED Lighting | No |
Voltage | 1.35V |
Form Factor/PCB Height | 1.23 Inch (31.25mm) |
Number of Pin | 288 Pin |
Warranty Details | Product life time |
Specialty | Netac Unbuffered DDR4 SDRAM DIMMs (Unbuffered Double Data Rate Synchronous DRAM Dual In-Line Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices. Each 288- pin DIMM uses gold contact fingers. The SDRAM Unbuffered DIMM is intended for use as main memory when installed in systems such as PCs. Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. On-board I2C serial presence-detect (SPD) EEPROM. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Databus write cyclic redundancy check (CRC). Temperature controlled refresh (TCR). Command/Address (CA) parity. Per DRAM Addressability is supported. 8 bit pre-fetch. Fly-by topology. Command/Address latency (CAL). Terminated control command and address bus. Gold edge contacts. RoHS Compliant and Halogen-Free. |
Netac Basic 16GB DDR4 3200MHz Desktop RAM
Model: Netac Basic 16GB
Capacity: 16GB
RAM Type: DDR4
Bus Speed: 3200MHz
Number of Pin: 288 Pin
Warranty: Product life time
Additional information
Brand | Netac |
---|---|
Model | Netac Basic 16GB |
Part No | NTBSD4P32SP-16 |
Capacity (GB/TB) | 16GB |
RAM Type | DDR4 |
Bus Speed(MHz) | 3200MHz |
CAS Latency | 16-20-20-40 |
Module Type | U-DIMM |
Speed Rating | PC4-25600 |
LED Lighting | No |
Voltage | 1.35V |
Form Factor/PCB Height | 1.23 Inch (31.25mm) |
Number of Pin | 288 Pin |
Warranty Details | Product life time |
Specialty | Netac Unbuffered DDR4 SDRAM DIMMs (Unbuffered Double Data Rate Synchronous DRAM Dual In-Line Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices. Each 288- pin DIMM uses gold contact fingers. The SDRAM Unbuffered DIMM is intended for use as main memory when installed in systems such as PCs. Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. On-board I2C serial presence-detect (SPD) EEPROM. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Databus write cyclic redundancy check (CRC). Temperature controlled refresh (TCR). Command/Address (CA) parity. Per DRAM Addressability is supported. 8 bit pre-fetch. Fly-by topology. Command/Address latency (CAL). Terminated control command and address bus. Gold edge contacts. RoHS Compliant and Halogen-Free. |
There are no reviews yet.