Netac Basic 4GB DDR4 2666MHz Desktop RAM NTBSD4P26SP-04
Model: Netac Basic 4GB
Capacity: 4GB
RAM Type: DDR4
Bus Speed: 2666MHz
Number of Pin: 288 Pin
Warranty: Product life time
Additional information
| Brand | Netac |
|---|---|
| Model | Netac Basic 4GB |
| Part No | NTBSD4P26SP-04 |
| Capacity (GB/TB) | 4GB |
| RAM Type | DDR4 |
| Bus Speed(MHz) | 2666MHz |
| CAS Latency | 19-19-19-43 |
| Module Type | U-DIMM |
| Speed Rating | PC4-21300 |
| LED Lighting | No |
| Voltage | 1.20V |
| Form Factor/PCB Height | 1.23 Inch (31.25mm) |
| Number of Pin | 288 Pin |
| Warranty Details | Product life time |
| Specialty | Netac Unbuffered DDR4 SDRAM DIMMs (Unbuffered Double Data Rate Synchronous DRAM Dual In-Line Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices. Each 288- pin DIMM uses gold contact fingers. The SDRAM Unbuffered DIMM is intended for use as main memory when installed in systems such as PCs. Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. On-board I2C serial presence-detect (SPD) EEPROM. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Databus write cyclic redundancy check (CRC). Temperature controlled refresh (TCR). Command/Address (CA) parity. Per DRAM Addressability is supported. 8 bit pre-fetch. Fly-by topology. Command/Address latency (CAL). Terminated control command and address bus. Gold edge contacts. RoHS Compliant and Halogen-Free. |
Related products
| Brand | Netac |
|---|---|
| Model | Netac Basic 4GB |
| Part No | NTBSD4P26SP-04 |
| Capacity (GB/TB) | 4GB |
| RAM Type | DDR4 |
| Bus Speed(MHz) | 2666MHz |
| CAS Latency | 19-19-19-43 |
| Module Type | U-DIMM |
| Speed Rating | PC4-21300 |
| LED Lighting | No |
| Voltage | 1.20V |
| Form Factor/PCB Height | 1.23 Inch (31.25mm) |
| Number of Pin | 288 Pin |
| Warranty Details | Product life time |
| Specialty | Netac Unbuffered DDR4 SDRAM DIMMs (Unbuffered Double Data Rate Synchronous DRAM Dual In-Line Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices. Each 288- pin DIMM uses gold contact fingers. The SDRAM Unbuffered DIMM is intended for use as main memory when installed in systems such as PCs. Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. On-board I2C serial presence-detect (SPD) EEPROM. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Databus write cyclic redundancy check (CRC). Temperature controlled refresh (TCR). Command/Address (CA) parity. Per DRAM Addressability is supported. 8 bit pre-fetch. Fly-by topology. Command/Address latency (CAL). Terminated control command and address bus. Gold edge contacts. RoHS Compliant and Halogen-Free. |
There are no reviews yet.